ZR-3330 Ambient air CO Analyzer
This analyzer is widely used for outdoor long-term continuous automatic sampling analysis. It is used in routine ambient air quality monitoring, environmental assessment, scientific research, emergency monitoring, and air quality monitoring station data comparison.
Application>>
Non dispersive infrared spectroscopy (ND-IR) is often used to detect gas & measure the concentration of carbon oxides (e.g. carbon monoxide, carbon dioxide). An infra-red beam passes through the sampling chamber and each gas component in the sample absorbs some particular frequency infra red.
Powerful function and ensure data stable
> Equipped with precision infrared light sources and optical sensors, ensure long service life and effective anti-interference.
> Uses a built-in inert PTFE sample inlet filter, which do not adsorb or react with the measured gas components.
> Adaptive filtering algorithm, fast response, low detection limit, high sensitivity.
> Measure environmental temperature, humidity, pressure, and provide real-time compensation for temperature and pressure, suitable for stable and accurate monitoring in different conditions.
Users friendly
> Datas can be switched to ppb, ppm, ppb, μmol/mol, μg/m3, mg/m3
> 7-inch touch screen, easy to operation.
> Zero point and span calibration can be performed manually.
> Store over 250000 data, check and print the data in real time by Bluetooth printer and exported by USB.
> Support GPS and 4G remote data upload.
Excellent protective performance
> Lightweight, easy to carry and install, rainproof and dustproof.
> A rugged IP65 weatherproof enclosure provides optimal performance, even in extreme conditions, purpose-built for the outdoors, unmanned monitoring.
Parameter |
Range |
Resolution |
CO concentration |
(0~50)ppm |
0.01ppm |
Sampling flowrate |
800 mL/min |
1mL/min |
Zero point noise |
≤0.05ppm |
|
Minimum detection limit |
0.1ppm |
|
Linearity |
±1 % F.S. |
|
Zero drift |
±1 ppb |
|
Span drift |
±1% F.S. |
|
Span noise |
≤0.1ppm |
|
Indication error |
±2%FS |
|
Flow stability |
≤90s |
|
Voltage stability |
±1%FS |
|
Effect of ambient temperature changes |
≤0.1 ppm /℃ |
|
Data storage |
250000组 |
|
Battery working time |
>4h |
|
Dimensions |
(L390×W278×H555) |
|
Host weight |
About 18.5kg |
|
Power supply |
≤200W |
|
Consumption |
AC(220±22)V,(50±1)Hz |
|
Working condition |
(-20~50)℃ |