Factory wholesale Mask Inhalation Resistance Test - Mask Bacterial Filtration Efficiency (BFE) tester – Junray

Short Description:

Send email to us WhatsApp

Product Detail

Feedback (2)

As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Kn95 Test Equipment , Automatic Diluter , Airflow Pattern Test , We sincerely welcome friends from all around the globe to cooperate with us within the foundation of long-term mutual benefits.

Factory wholesale Mask Inhalation Resistance Test - Mask Bacterial Filtration Efficiency (BFE) tester – Junray Detail:

price：US $48,000-90,000/ Piece

Introduction

Key specifications of Model ZR-1000 mask bacteria filtration efficiency tester (BFE) not only meet the requirements of B.1.1 in YY0469-2011 <technical requirements for medical surgical masks>, but also meet the requirements of ASTMF2100, ASTMF2101 and European EN14683 standards. What’s more, we made innovative improvements based on this, with double gas contrast sampling method at the same time, improve the precision of sampling. It is applicable to the performance test of the mask bacterial filtration efficiency by the metrological verification department, scientific research institutes, mask manufacturers and other relevant departments.

Features

The negative pressure test system ensures the safety of operators;

The negative pressure cabinet is equipped with peristaltic pump, A and B two-path six stage Anderson sampler;

The flow of peristaltic pump can be set;

The flow rate of special microbial aerosol generator can be set.

Good nebulization performance, aerosol size conforms to global standards;

Controlled by embedded high-speed industrial microcomputer;

10.4-inch industrial high brightness colored touch screen;

USB port, supporting data transfer to USB flash disk;

Support Bluetooth printing;

Built-in high brightness lights;

Built in leakage protection switch to protect the safety of operators;

The inner layer of the cabinet is made of stainless steel, and the outer layer is cold-rolled sheet sprayed by plastic;

Heat preservation and flame retardant is set between inner and outer layers;

The front openable glass door is convenient for the experimental operator to observe and operate;

Detachable holder, and the caster can be used for supporting and moving.

Retractable rotating display screen, convenient to operate;

The negative pressure cabinet has a built-in operating key board, which is corrosion-resistant and UV-resistant, make it convenient for operations.

Standards

EN14683-2019

ASTM F2100, STM F2101

YY 0469-2011

YY/T 0969-2013

GB/T 38880-2020

T/CNTAC 55—2020 T/CNITA 09104——2020

T/CTCA 7—2019

Specifications

Main parameters	Parameter range	Resolution	MPE (Maximum Permissible Error)
Sample Flow Rate of A	28.3L/min	0.1L/min	±2.5%
Sample Flow Rate of B	28.3L/min	0.1L/min	±2.5%
Nebulization flow rate	(6～10)L/min	0.1L/min	±5.0%
Peristaltic pump flow	(0.006～3.0) mL/min	0.01mL/min	±2.5%
Front pressure of A-path flowmeter	(-20～0)kPa	0.1kPa	±2.5%
Front pressure of B-path flowmeter	(-20～0)kPa	0.01kPa	±2.5%
Front pressure of nebulizer	(0～50)kPa	0.01kPa	±2.5%
Negative pressure in aerosol chamber	(-90～-120)Pa	0.1Pa	±2.0%
Operation temperature	(0～50)℃
Cabinet negative pressure	(-50～-200)Pa
Data storage capability	＞100000 groups
Characteristics of HEPA filter	Filter efficiency for particles is above 0.3μm ≥ 99.99%
Mean mass diameter of aerosol	Average particle diameter is (3.0 ± 0.3)μm, geometric standard deviation ≤ 1.5
Captured particle size of Two-path 6-stage Anderson sampler	1st stage > 7 μm, 2nd stage (4.7-7) μm,3rd stage (3.3-4.7) μm, 4th stage(2.1-3.3) μm, 5th stage (1.1-2.1) μm, 6th stage (0.6-1.1) μm
Size of aerosol chamber	(length 600× diameter 85× thickness 3) mm
Total number of positive quality control sampler	(2200±500) CFU/mL
Ventilation flow rate of negative pressure cabinet	≥5m³/min
Dimensions of negative pressure cabinet door	(length 1100× width 780) mm
Host size	(length 1050× width 635× height 1310) mm
Bracket size	(length 1050× width 635× height 650) mm
Power supply	AC220V±10%，50Hz
Instrument noise	＜65dB(A)
Weight of whole machine	About 180 kg
Overall power consumption	＜500W

Deliver Goods

Product detail pictures:

Related Product Guide:

We enjoy an extremely good status among our prospects for our great merchandise top quality, competitive price and the ideal service for Factory wholesale Mask Inhalation Resistance Test - Mask Bacterial Filtration Efficiency (BFE) tester – Junray , The product will supply to all over the world, such as: Turin, Albania, Thailand, To make every client satisfied with us and achieve win-win success, we will continue to try our best to serve and satisfy you! Sincerely looking forward to cooperating with more overseas customers based on mutual benefits and great future business. Thank you.

This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
5 Stars

By Nainesh Mehta from Jamaica - 2017.01.11 17:15

Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.
5 Stars

By Constance from Barbados - 2018.07.26 16:51

Write your message here and send it to us