Factory For Mask Filter Tester - ZR-1311 Salt Aerosol Generator – Junray

Short Description:

Send email to us WhatsApp

Product Detail

Feedback (2)

The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for Microbial Aerosol Generator , Bfe Test Machine , Medical Mask Filtering Efficiency Tester , If you are interested in any of our products or would like to discuss a customized order, please feel free to contact us.

Factory For Mask Filter Tester - ZR-1311 Salt Aerosol Generator – Junray Detail:

US $7,500-15,000/ Piece

Introduction

ZR-1311 salt aerosol generator is a special instrument that adopts a Collison nozzle to atomize and dry specific concentration of NaCl solution to produce aerosol particles at specific size and concentration. In order to widely adapt to the national climate, it has an external air source design, drying device and multi-nozzle regulating valve. When the air flow rate is between 100L/min-120L/min, the output aerosol concentration can reach to (10 -50 )μg/m³.

Scope of application

This instrument is applicable to medical device inspection institutes, centers of diseases control and prevention, hospitals and HEPA filter manufacturers for performing leakage detection of masks, filter material or HEPA filters.

Standards

GB/T 32610-2016 Technical specification of daily protective mask

GB 2626-2006 Respiratory protective equipment——Non-powered air-purifying particle respirator

GB 2626-2019 Respiratory protective equipment——Non-powered air-purifying particle respirator

GB 19082-2009 Technical requirements of single-use protective clothing for medical use

GB 19083-2010 Technical requirements for protective mask for medical use

TAJ 1001-2015 PM2.5 Protective mask

YY 0469-2011 Surgical mask

EN 149

NIOSH 42 CFR Part 84

Features

External connected high-pressure air source makes airflow stable and aerosol output balanced.

It can generate micron and sub-nano size aerosols.

The concentration of particles is adjustable in a wide range.

Specifications

Main Parameters	Parameter Range
Working pressure	（240~250）KPa
Pressure of external air source	≥0.8 MPa
Concentration range of suspended particles	10 μg/L-50 μg/L when the airflow is 100 L/min
Range of aerosol particle size	0.02~2 μm
Initial temperature of accompanied wind	150℃
Generation type	a Collison nozzle dry after nebulization
Working solution volume	Bottle capacity is 500 ml
Working solution concentration	1.5%~2%
Instrument noise	＜50 dB(A)
Host size(L×W×H)	（400×400×900）mm
Host weight	about 15 kg
Host power consumption	＜2 KW

Deliver Goods

Product detail pictures:

Related Product Guide:

Gaining customer satisfaction is our company's aim forever. We will make great efforts to develop new and top-quality products, meet your special requirements and provide you with pre-sale, on-sale and after-sale services for Factory For Mask Filter Tester - ZR-1311 Salt Aerosol Generator – Junray , The product will supply to all over the world, such as: Argentina, Hungary, Uzbekistan, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.

The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
5 Stars

By Pearl Permewan from Nigeria - 2017.10.13 10:47

Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
5 Stars

By Geraldine from Angola - 2017.08.21 14:13

Write your message here and send it to us